Electro Voice Speaker

Product Details:

The EV-PCS6.2-IN is a high-efficiency coaxial full range premium ceiling loudspeaker providing excellent speech and music reproduction. This ceiling speaker gives sound distribution for a wide scope of ceiling mounted applications. These are ideal for hotels, restaurants, shopping centres, convention centres, office buildings etc.where both speaker and music reproduction of high quality is required.

Key Features:

• Premium paging and sound reinforcement applications
• Coaxial Two Way Ceiling Speaker
• Easy to install
• Simple power tapings at full, half and quarter power
• Tested for PHC with 100 hr continuous operation as per IEC60268-1&5

Product Details:

Key Features:

• 8" coaxial two-way with extended LF
• Waveguide coupled Ti Tweeter
• Full bandwidth overload protection
• Front baffle wattage tap adjustment
• Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
• Includes tile bridge and mounting ring for easy installation
• Integrated ported enclosure for extended bass response
• UL and CE listed

 

General Description:
The Electro-Voice ® EVID C8.2 loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome
tweeter. The EVID C8.2 loudspeaker utilizes a 2 and order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2 utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8-ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fibreglass damping material, provides an optimum internal volume for extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4- pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. The EVID C8.2D model features a 3-pin fire-safety rated input block. A tile bridge is included for safe suspension of the C8.2 ceiling systems in a drop ceiling that uses mineral wool, or other fibre-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

 

Architects’ & Engineers’ Specifications:

The EVID C8.2 loudspeaker system shall be comprised of a UL 94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear enclosure, powder coated grille with safety tether, the transformer with 8-ohm bypass, and 8-inch polypropylene low-frequency transducer with coaxially-mounted waveguide coupled 1-inch titanium coated dome tweeter. The loudspeaker shall meet the following criteria: power rating shall be 75 watts of EIA RS-426A pink noise (6 dB crest factor). Frequency response, uniform from 50 Hz to 20 kHz. Pressure sensitivity, 91dB SPL at 1 meter (3.3 feet) on axis with one watt of pink noise (ref. 20μPa). Minimum impedance, 6.0 ohms. The loudspeaker shall be 255 mm (10.0 in.) deep and 270 mm (10.6 in.) in diameter. Weight shall be 5.0 kg. (11.0 lb) The coaxial ceiling loudspeaker shall be the Electro-Voice ® model EVID C8.2.

Product Details:

Key Features:

• 10" High-Excursion Transducer for extended LF
• Low Pass Network with Overload Protection
• Front Baffle Wattage Tap Adjustment
• Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
• Includes tile bridge and mounting ring for easy installation
• Integrated ported enclosure for extended bass response
• UL and CE listed

 

General Description:
The Electro-Voice ® EVID C10.1 loudspeaker system is a complete low-frequency ceiling subwoofer package. The EVID C10.1 is designed to augment the low-frequency response of any EVID ceiling speaker. The package consists of a bezel assembly, grille, rear enclosure, 10-inch loudspeaker and internal line-matching transformer. The EVID C10.1 loudspeaker utilizes a 2 and order crossover network to provide the correct bandpass frequency response for use with any EVID Ceiling loudspeaker. The C10.1 utilizes a transformer that offers a selection of 7.5 (70-V only), 15, 30 or 60 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8-ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fibreglass damping material, provides an
optimum internal volume for extended low-frequency performance. A rear cover, with provisions for a junction box
fitting, provides access to a 4-pin terminal block that allows
direct connection to the speaker with 12 gauge wire and
provides full-range pass through to additional speakers. A tile
bridge is included for safe suspension of the C10.1 ceiling
systems in a drop ceiling that uses mineral wool, or other fibre-
based ceiling tiles. The EVID line of ceiling speakers has been
designed to work together as a complete system in a wide
range of different ceiling constructions. They provide wide
dispersion, high-efficiency, high-maximum output, ease of
installation, and wide-range reproduction of music.

 

Architects’ & Engineers’ Specifications:

The EVID C10.1 loudspeaker system shall be comprised of a UL
94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear
enclosure, powder coated grille with safety tether, transformer
with 8-ohm bypass and 10-inch polypropylene low frequency
transducer. The loudspeaker shall meet the following criteria:
power rating shall be 100 watts of EIA RS-426A continuous pink
noise (6 dB crest factor). Frequency response, 45 Hz to 180 Hz.
Pressure sensitivity, 94 dB SPL at 1meter (3.3 feet) on axis with
one watt of pink noise (ref. 20μPa). Minimum impedance, 6.0
ohms. The loudspeaker shall be 320 mm (12.6 in.) in diameter
and 303 mm (11.9 in.) deep. Weight shall be 7.0 kg. (15.5 lb). The subwoofer ceiling loudspeaker shall be the Electro-Voice ® model EVID C10.1.

Product Details:

Key Features:

• High 100 dB Sensitivity
• Wide, Smooth 85 Hz - 18 kHz Frequency Response
• High 100W Power Handling
• 4 Pin Quick Disconnect Phoenix Connector
• Integrated 3/8” Threaded Rod and Pendant Mount Rigging Points for use in Open Ceiling Installations
• 64W Transformer with Automatic Saturation Compensation for 70V/100V Operation
• Includes Tile Bridge and Mounting Ring for Easy Installation into Tile Ceilings

 

General Description:
The Electro-Voice ® EVID C12.2 loudspeaker system is a
high-efficiency two-way ceiling loudspeaker package for high
ceiling applications. The loudspeaker features the EVID 920-
8B transducer, a 12" coaxial with high power handling and
100 dB sensitivity. The integrated 64W transformer allows
for use in 70V/100V applications and includes automatic
saturation compensation. Transformer tap selection is via
a convenient switch on the front baffle. The perforated grille
is finished in semi-gloss white powder-coated enamel. The
baffle and bezel are constructed from UL 94V-0 rated ABS.
The rear enclosure is constructed from heavy gauge steel and
is has a durable black powder-coat that blends in when
used in open ceiling applications. The rear enclosure
provides an optimum internal volume for extended low-
frequency performance. The C12.2 can be suspended by an
integrated 3/8" rigging point for use with threaded rod, or it
can be mounted using the 3 pendant mount tabs on the rear
enclosure. A rear cover, with provisions for a junction box
fitting, provides access to a 4-pin phoenix type connector
that allows direct connection to the speaker with 12 gauge
wire and provides pass through to additional speakers. A
tile bridge is included for safe suspension of the C12.2
ceiling systems in a drop ceiling that uses mineral wool, or
other fiber-based ceiling tiles.

 

Architects’ & Engineers’ Specifications:

The EVID C12.2 loudspeaker system shall be comprised of a UL
94V-0 fire rated ABS baffle/bezel assembly, black powder-coated
steel rear enclosure, white powder-coated grille with safety
tether, 64W transformer with 8 ohm bypass and automatic
saturation compensation, and Evid 920-8B 12" coaxial transducer.
The loudspeaker shall meet the following criteria: power rating
shall be 100 watts of EIA RS-426A pink noise (6 dB crest factor).
Frequency response, uniform from 85 Hz to 18 kHz. Pressure
sensitivity, 100 dB SPL at 1 meter (3.3 feet) on axis with one watt
of pink noise (ref. 20μPa). Minimum impedance, 5.0 ohms. The
loudspeaker shall be 333 mm (13.12 in.) deep and 414 mm (16.31 in.) in diameter. Weight shall be 13.3 kg. (29.3 lb) The coaxial ceiling loudspeaker shall be the Electro-Voice ® model EVID
C12.2.

Product Details:

Features:

• High output true compression driver for wide dispersion and superior coverage control out to 10 kHz
• Long throw 6.5 inches (165 mm) woofer housed in a large vented steel enclosure for extended LF performance down to 50 Hz
• 200-watt power handling provides for 113 dB maximum SPL
• The front baffle transformer tap adjustment switch
• Includes tile rails and “C” mounting ring

 

The EVID PC6.2 speaker system from Electro-Voice is a complete high-performance two-way ceiling speaker package. The EVID PC6.2 is ideal for background and foreground music, voice evacuation, paging, and sound reinforcement applications. All EVID Premium Ceiling Speaker models provide a unique combination of high acoustic output, superb coverage control, high power handling and wide dispersion, to cover virtually any size listening area. The EVID PC6.2 comes completely assembled with an integrated bezel assembly, grille, rear enclosure, 6.5-inch (165 mm) coaxial two-way speaker and internal high power line-matching transformer. The speaker features a waveguide
coupled true compression HF driver and a long excursion 6.5-inch (165 mm) woofer. The EVID PC6.2 utilizes a transformer that offers a selection of 7.5 W (70-V only), 15, 30 or 60 watts delivered to the speaker system using either 70-V or 100-V lines, or 8-ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is fully zinc plated and finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from fire rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fibreglass damping material, provides an optimum internal volume for extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker
with up to 2.5 mm (12 AWG) wire and provides pass through to additional speakers. Two (2) adjustable metal tile bridges and metal “C” ring are included for safe suspension of the EVID PC6.2 ceiling systems in a drop ceiling that uses mineral wool, or other fibre-based ceiling tiles. The wide range of EVID ceiling speakers has been designed to work together as a complete system in a variety of different ceiling constructions.

 

System overview:

Architects’ & Engineers’ Specifications:

The EVID PC6.2 speaker system shall be comprised of a UL 94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear enclosure, powder coated grille with safety tether, the transformer with 8-ohm bypass, and 6.5- inch long excursion low-frequency transducer with coaxially-mounted true compression HF driver. The speaker shall meet the following criteria: power rating
shall be 100 watts of IEC 268-5 pink noise (6 dB crest factor). Frequency response, uniform from 50 Hz - 20 kHz. Pressure sensitivity, 87 dB SPL at 1 meter (3.3 feet) on axis with 1 watt of pink noise (ref. 20μPa). Minimum impedance, 6.5 ohms. The speaker shall be 260 mm (10.4 in) deep and 280 mm (11.0 in) in
diameter. Weight shall be 7.0 kg (15.4 lb). The coaxial ceiling speaker shall be the model EVID PC6.2 from Electro-Voice.

Product Details:

Features:

• High output true compression driver for wide dispersion and superior coverage control out to 10 kHz
• Long throw 8-inch (200 mm) woofer housed in a large vented 14 gauge steel enclosure for extended LF performance down to 40 Hz
• 200-watt power handling provides for 114 dB maximum SPL
• The front baffle transformer tap adjustment switch
• Includes tile rails and “C” mounting ring

 

The EVID PC8.2 speaker system from Electro-Voice is a complete high-performance two-way ceiling speaker package. The EVID PC8.2 is ideal for background and foreground music, voice evacuation, paging, and sound reinforcement applications. All EVID Premium Ceiling Speaker models provide a unique combination of high acoustic output, superb coverage control, high power handling and wide dispersion, to cover virtually any
size listening area. The EVID PC8.2 comes completely assembled with an integrated bezel assembly, grille, rear enclosure, 8-inch (200 mm) coaxial two-way speaker and internal high power line-matching transformer. The speaker features a waveguide
coupled true compression HF driver and a long excursion 8-inch (200 mm) woofer. The EVID PC8.2 utilizes a transformer that offers a selection of 7.5 W (70-V only), 15, 30 or 60 watts delivered to the speaker system using either 70-V or 100-V lines, or 8-ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is fully zinc plated and finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from fire rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fibreglass damping material, provides an optimum internal volume for extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker
with up to 2.5 mm (12 AWG) wire and provides pass through to additional speakers. Two (2) adjustable metal tile bridges and metal “C” ring are included for

 

System overview

Architects’ & Engineers’ Specifications:

The EVID PC8.2 speaker system shall be comprised of a UL 94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear enclosure, powder coated grille with safety tether, the transformer with 8-ohm bypass, and 8- inch long excursion low-frequency transducer with coaxially-mounted true compression HF driver. The speaker shall meet the following criteria: power rating
shall be 100 watts of IEC 268-5 pink noise (6 dB crest factor). Frequency response, uniform from 40 Hz - 20 kHz. Pressure sensitivity, 88 dB SPL at 1 meter (3.3 feet) on axis with 1 watt of pink noise (ref. 20μPa). Minimum impedance, 6.0 ohms. The speaker shall be 324 mm (12.76 in) deep and 327 mm (12.87 in) in diameter. Weight shall be 8.0 kg (17.6 lb). The coaxial ceiling speaker shall be the model EVID PC8.2 from Electro-Voice.

Product Details:

Key Features:

• 4” coaxial two-way
• Waveguide coupled Ti tweeter
• Full bandwidth overload protection
• Front baffle wattage tap adjustment
• Integrated low loss matching transformer allows for either 70v/100v or 8Ω operation
• Includes tile bridge and mounting ring for easy installation
• Integrated ported enclosure for extended bass response

General Description:
The Electro-Voice EVID C4.2 loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 4-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID C4.2 loudspeaker utilizes a 2nd order crossover network at 3.3kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C.42 utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8Ω bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-
coated enamel. The baffle and bezel are constructed from UL
94V-0 rated ABS. The rear enclosure is constructed from zinc-
plated, heavy gauge steel. The rear enclosure, with fibreglass
damping material provides an optimum internal volume
for extended low-frequency performance. A rear cover,
with provision for a junction box fitting, provides access to
a 4-pin terminal block that allows direct connection to the
speaker with a 12-gauge wire and provides pass-through to
additional speakers. The EVID C2.4D model features a 3-pin
fire-safety rated input block. A tile bridge is included for safe
suspension of the C4.2 ceiling systems in a drop ceiling that
uses mineral wool, or other fibre-based ceiling tiles. The
EVID line of ceiling speakers has been designed to work
together as a complete system in a wide range of different
ceiling constructions. They provide wide dispersion, high-
efficiency, high-maximum output, ease of installation, and
wide-range reproduction of music or voice.

Architects’ and Engineers’
Specifications:
The EVID C4.2 loudspeaker system shall be comprised of a UL 94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear enclosure, powder coated grille with safety tether, the transformer with 8Ω bypass and 4-inch polypropylene low-frequency transducer with coaxially-mounted waveguide loaded 3⁄4-inch titanium coated dome tweeter. The loudspeaker shall meet the following criteria: power rating shall be 50 watts of EIA RS-426A pink noise (6dB crest factor). Frequency response, uniform from 65Hz to 20Hz. Pressure sensitivity, 86dB SPL at 1meter (3.3 feet) on axis with one watt of pink noise (ref. 20μPA). Minimum impedance, 6.0Ω. The loudspeaker shall be 181mm (7.1in.) in diameter and 176mm (6.9in) deep. Weight shall be 2.7kg (6.0lb). The coaxial ceiling loudspeaker shall be the Electro-Voice model EVID C4.2.

Product Details:

Key Features:

• Line-array enhanced coverage control
• Organic, unobtrusive shape
• Strong-Arm-Mount TM for easy, flexible aiming
• Full-bandwidth overload protection
• Weather resistant - Conforms to Mil-Spec 810 and IEC 529 IP 34
• Dual LF transducers for extended bass and greater power handling and output
• Ti direct-radiator HF transducer, Neodymium structure
• High sensitivity
• Magnetically shielded
• Zinc-plated grilles
• Transformer Versions

 

General Description:
The EVID 4.2 is a very compact full range loudspeaker ideal
for indoor and outdoor applications requiring high-quality
sound. It’s shape and size make it nearly invisible for use in
background/foreground music systems for restaurants, bars,
patios, retail, and other applications The 4.2’s three-dimensional elliptic baffle symmetrically locates the 1” Ti high-frequency element with a Coherent Coverage Waveguide in front of, and between the 4” low-frequency drivers. This careful shaping, location, and 10° splaying of the of units provide coverage control by the resulting line array. Lobing is controlled by physically
“shadowing” the LF transducers from each other over the bandwidth they would normally exhibit interference. EVID’s
mounting system provides a greater range of aiming angles in
both horizontal and vertical planes than other types. The
curved grille features designed-in weather resistance and a
hidden leash for safety. All models are available in black or white, and can easily be painted to match the décor. Transformer versions are also available for constant voltage systems.

 

Architecture & Engineering Specs:
The loudspeaker shall be a two-way system consisting of two 4” (102mm) low-frequency transducers, 1” (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and frequency-dividing network installed in a vented, line array enclosure. The network shall include a passive limiter for both the low frequency and high-frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 200 watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 65 Hz – 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 89 dB at one watt, 200 Hz – 10 kHz at one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency transducer shall drive a waveguide to evenly cover 120° horizontally by 80° vertically. The enclosure shall be moulded of acrylic butyl styrene. The enclosure shall be 12.2” (310mm) high, 6.9” (175mm) wide, 8.5” (216mm) deep. The finish shall be a paintable black or white. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. The loudspeaker shall be adjustable over a range of 100° horizontally and 90° vertically. The support bracket shall be low profile and integral with the enclosure. The system shall be weather resistant to MIL Spec 810 and IEC 529 IP 34 test conditions. The surface mount loudspeaker shall be the Electro-Voice® EVID model 4.2.

Product Details:

The EVID Compact Sound Speaker System is a very compact full-range loudspeaker ideal for applications requiring high-quality sound. Its shape flexibility and size make it nearly invisible for use in background/ foreground music systems for restaurants, bars, patios, retail, and other applications. The system consists of a high-performance surface mount 8-inch subwoofer module with a crossover network to support the included four (4) surface mount 2-inch satellite speakers. The system provides for easy signal connections at the subwoofer and can support either 4/8 ohm or 70/100v signal connections. Its high power handling allows the system to be used in a wide variety of environments and spaces to provide high-quality background or foreground music.

Features:

• A complete matched background/foreground music speaker solution.
• Large 8-inch (200 mm) woofer transducer for substantial low-frequency output.
• Direct connection of satellites to subwoofer — simplifies installation wiring.
• Mounting brackets with a wide range of motion for surface mount satellites provide easy and secure mounting of the speaker to the wall.
• Convenient detachable phoenix style signal connections speed up installation time.

Product Details:

ZLX models cut through the competition with the most complete and innovative package of features in theirclass–all of which work together to make it quicker and easier than ever to take control of your sound, whatever the gig. When choosing a loudspeaker, it''s always wise to ask “What’s inside the box” Then take a listen and hear the EV difference for yourself. Featuring custom drivers housed in an innovative new cabinet design, the two compact and versatile ZLXmodels make EV ’s renowned sound quality and rugged reliability more accessible than ever before. The only loudspeaker in its class that matches EV-engineered drivers with a custom-built Class-D amplifier module and powerful DSP. Whether pole-mounted or used as a floor monitor, ZLX delivers stunning sonic impact and intelligibility—the legendary“EV Sound” the pros trust.

Features:

• LCD display and 1-knob DSP control with presets for precise and speedy setup.
• Input level meters and independent amplifier control to ensure optimal gain structure.
• Front LED for “power on” and “limit” indication.
• Patented split-baffle design for superior driver time alignment.
• Durable composite construction with innovative hi/lo grip design for easy pole mounting.

Product Details:

The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category. Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present.EV''s industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established

Features:

• 1600 W (peak), 129 dB peak SPL utilizing high-sensitivity transducer designed and engineered by for maximum punch.
• High-output EVS-12L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.
• System reliability verified with over 500 hours of abuse testing and endurance testing.
• Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish.
• Professional-grade hardware: integrated M20threaded pole mount plate and two-handle design for easy lifting.